• Model SE-EXP
• Plug’n’Play®. Only the 1st panel will need to be connected to the battery system and all other panels will ‘daisy-chain’ into the first panel
• Compatible with Sunsei SE-4000, SE-6000, SE-8000, SE Kit 16A, SE Kit 24A
• The box includes
  2 connection bridges
  + connecting wire with connectors
  + marine grade stainless steel mounts
  + nuts and bolts
• For connecting two panels - order 1 kit; for connecting three panels - order two kits, etc
• Length of wire: 24” / 60 cm
• Max current of connecting wire: 25A
• IMPORTANT ICP Solar helps the Planet with 1% of donation to the Captain Planet Foundation for every online sale of Sunsei Solar products 

 

INSTALLATION PROCEDURE
 
1. On each panel that is to be mounted, attach the supplied brackets that came with the solar panel to the underside of the panel frame on all sides EXCEPT the sides which will be adjacent to another solar panel.
 
2. Place panels 1 and 2 side-by-side on the mounting surface, face up. Attach the power cable to the battery system to panel 1. Attach the Expansion Kit cable from the opposite connector on panel 1 to the adjacent connector on panel 2. Note: these connectors are on the underside of the panel.
 
3. Lift the side of panel 1 that is adjacent to the side of panel 2 and insert the ridges on lower half of the mounting bridge into the frame slots. Next, place panel 2 side frame on the lower half of the mounting bridge locating the ridges onto the frame slots of panel 2.
 
4. Place the upper mounting bridge and bolt it into the lower mounting bridge. Tighten securely. Install all mounting screws through the brackets into the mounting surface.
 
NOTE: The installation procedure above is an abstract from the complete manual (included in the box). Before installing your product please consult this full paper version.
  

There are no accessories available for this product